The patented TITUS Twister mixing aerator keeps wet wells and lift stations fully mixed and aerated, controlling FOG, odor, and corrosion with no moving parts in the water.
The TITUS Twister Mixing Aerator is built to solve the most common collection-system problems: fats, oils, and grease (FOG), hydrogen sulfide odor, corrosion, and blockages. It delivers strong aeration and mixing across pump stations, lift stations, and wet wells in municipal, industrial, and commercial systems.
Twisters are available throughout North America through the industry leaders in our Distributor Network.
The patented TITUS Twister mixing aerators are made in the USA, proudly produced by Titus Wastewater Solutions at our facility in Casper, Wyoming.
Wastewater agencies face mounting challenges in maintaining collection systems. Hydrogen sulfide (H₂S), acids, and other byproducts from municipal and industrial sources generate odor, safety risks, and corrosion.
Physical debris compounds the issue. Fats, oils, grease (FOG), and inorganic solids contribute to blockages, while wipes and non-dispersibles form “mop heads” that clog pumps and cause lift station failures. Pharmaceuticals and pathogens further impact system health.
Discharges from breweries, restaurants, and industrial facilities continue to overwhelm infrastructure, demanding stronger, more resilient solutions.
The TITUS Twister mixing aerator combines Air Lift Technology with a stainless steel manifold and base assembly, a perforated rubber membrane diffuser, purpose-built HDPE blades, durable blowers, and a protective cabinet enclosure.
It delivers high-efficiency mixing and aerobic conditioning while preventing pump air-lock and cavitation. Unlike grinders that shred wipes and rags into smaller particles that pass through to the plant, the Twister keeps that debris intact and moving so it can be screened and removed at the treatment facility. The result is less clogging, lower maintenance, and relief from one of the most common pain points in wastewater systems.
Where it’s used:
What it controls:
A wastewater mixing aerator keeps a wet well or lift station fully mixed and aerated so solids stay suspended and odor-causing buildup never develops. The TITUS Twister does this with Air Lift Technology: a shore-side blower feeds a submerged diffuser, driving strong circulation with no moving parts in the water.
In lift stations and pump stations, the Twister targets four costly problems: fats, oils, and grease (FOG), hydrogen sulfide odor and corrosion, blockages from wipes and rags, and pump air-lock. It handles all four at the source by keeping the well aerobic and in constant motion.
The difference is where the water sits. The Mixing Aerator is built for confined collection-system structures like wet wells, lift stations, and pretreatment manholes. The Twister-FL Floating is built for open surface water like lagoons and ponds. If your problem is in the collection system, choose the Mixing Aerator.
No. The blower and controls sit shore-side in a protective cabinet, and the only submerged parts are the manifold and diffuser, so there are no in-water electrical components to service. Maintenance is minimal, and the air-driven design means fewer service interruptions and longer pump life.
Yes. Because the blower and controls sit shore-side and only the manifold and diffuser go in the water, the Twister installs into existing wet wells without in-water electrical, which keeps install cost and downtime low.
Sizing comes down to two factors: your operating depth and the area you need kept in motion. Twister models cover an 8 to 12 foot diameter area of influence at depths from 2 to 11 feet. Use the model selector above or request a sizing review for a site-specific match.
The Ozone Enhanced models, TT20 and TT40, inject ozone into the same mixing process for advanced FOG and odor control. They are the step up for sites where standard diffused air alone is not keeping pace with heavy grease or persistent odor.
Yes. The patented Twister mixing aerators are made in the USA at the Titus Wastewater Solutions facility in Casper, Wyoming, and are engineered to meet Build America, Buy America (BABA) requirements for federally funded wastewater projects.
Looking for a smarter, low-maintenance solution to wastewater mixing? Get in touch today to see how the TITUS Twister controls FOG and odor, keeps solids suspended, and extends the life of your pumps.